Contact Us
TEL: +86-575-85225608
Fax: +86-575-85228925
E-mail: sales@yofahardware.com
Address: Room B709, Modern Building, Shaoxing, Zhejiang, China
Home > News > Content
The Hollow Rivet
Apr 01, 2018

The hollow rivet has been machined to the head at the bottom of the half-hollow rivet, because the weight is light and the head is weak, and it is used for riveting of non-metallic materials with small load. Hollow rivet is commonly used in apparel, footwear and other industries, solid rivets need riveting again, for heavy industry combination, are often not detachable structure, the most widely used half a hollow rivet, beam mouth (wire diameter the smaller) nail to use hard wire rod production, can do not need to advance within the hole through the thickness of 0.5 mm steel plate, the rivet cannot twist deformation, widely used in the password boxes, suitcases and military bags above, hollow nail (half a hollow rivet) are fabricated by soft line, general requirements riveting after not craze, there are many kinds of type, shaft in some toys now has now begun using large half a hollow screw or lash screw, can greatly reduce the cost of production. The core rivets and core rivets are used for the riveting of relatively thin soft materials. Generally, they are not strict. The semi-hollow rivet is primarily used for riveting situations with small load.