Contact Us
TEL: +86-575-85225608
Fax: +86-575-85228925
E-mail: sales@yofahardware.com
Address: Room B709, Modern Building, Shaoxing, Zhejiang, China
Home > Knowledge > Content
How do you remove the tubular rivet?
May 01, 2018

As we all know that tubular rivet fastener is very strong, want it is not easy to tear open come down to it, no skills will feel has the certain difficulty, so I want to share with you will have greater help to you, you might as well to learn.

1. Drill the tubular rivet core with a hand drill.

2. If there is no electric drill, there will be hand grinding wheel;

3. If there are no two, use a file to file a thin rivet head and hammer it in.

If not, only use a small chisel like a screwdriver to gouge the rivet head off or chisel a bit higher and then screw it out with pliers.


Previous: How should tubular rivets be cleaned after encountering dirt?

Next: An example is given to determine the length of the tubular rivet.