Contact Us
TEL: +86-575-85225608
Fax: +86-575-85228925
E-mail: sales@yofahardware.com
Address: Room B709, Modern Building, Shaoxing, Zhejiang, China
Home > Knowledge > Content
What tools are used for tubular rivets?
May 01, 2018

Manufacturing, installation, and batch use of tubular rivets are generally used for riveting machines (rivets). Small or scattered use, can be done by hand with simple tools, common tools: round head small hammer, with rolled edge function of the conical bulge, can be. Without this tool, you can use the sample of the fitter (the cone head) to break out of the conical head first, then use the round head to slowly turn over the edge, also can finish the riveting work. Flexible selection tool based on existing conditions.

Previous: An example is given to determine the length of the tubular rivet.

Next: Small rivet, big effect.